Altronix eBridge1CRT Installation Instructions Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Altronix eBridge1CRT Installation Instructions herunter. Altronix eBridge1CRT Installation Instructions User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
eBridge1CRT - 1 -
Overview:
The eBridge1CT and eBridge1CR are CAT5 to Coax cable Ethernet adapters. The paired set enables fast 10/100Base-T
Ethernet digital communication to be transmitted over Coax cable. These plug and play units facilitate system upgrades
from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with install-
ing new network cabling. In addition data transmission over the Coax is up to 1500’ (five times the 100m/328ft Ethernet
maximum length). At the same time the units can combine Composite Video Signal with the Ethernet data enabling con-
nection to an analog input on a monitor or matrix switch.
Installation Instructions:
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and
authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire suitable for the application.
eBridge1CT and eBridge1CR are not intended to be connected to outside plant leads and should be installed indoors
within the protected premises. eBridge1CT and eBridge1CR are intended for indoor use only.
1. eBridge1CR installation:
a. Secure unit to desired mounting surface with a proper fastening device utilizing the unit’s mounting hole
(Fig. 2a, pg. 3). Unit should be mounted in proximity to ethernet switch/network, NVR or video server.
b. Connect 16VAC/24VAC Class 2 plug-in transformer or 12VDC/24VDC (polarity not observed) Class 2 power
supply to jack marked [Power Input] utilizing barrel connector (supplied) (Fig. 1, pg. 2).
Use 22AWG-16AWG wire for this connection.
Agency Listings:
• UL/CULListedforInformation
Technology Equipment (UL 60950-1).
• CEapproved.
• C-Tickcomplant.
Compliant:
• Incorporates*sloc
TM
(Security Link over Coax) technology.
Input:
• 12VDCto24VDCClass2powersupply(polarity not
observed) or 16VAC to 24VAC Class 2 plug-in
transformer.
Power Consumption:
• eBridge1CR/eBridge1CT:
12VDC/275mA, 24VDC/110mA,
16VAC/375mA, 24VAC/200mA.
Ethernet:
• Connectivity:RJ45,auto-crossover.
• Wiretype:4-pairCat-5orbetterstructuredcable.
• Distance:upto328ft.(100m).
• Speed:10/100BaseT, half/full duplex, auto negotiation.
• Throughput is rated to pass 25mbps of data at
distances up to 1500 ft. With proper headend
equipment, multiple Megapixel cameras can be used.
Coax:
• Distance:upto1,500ft.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• Blue LED - Coax link connection.
• YellowandGreenLED(RJ45)IPLinkstatus,
10/100Base-T/active.
• GreenLED-Power.
Environmental:
• Operating Temperature: 14ºF to 122ºF (--- 10ºC to +50ºC).
• Storage Temperature:
-- 22º to 158ºF (--- 30º to +70ºC) Storage.
• Humidity: 20 to 85%, non-condensing
Accessories:
• Compositevideocables(included)-enablessimultaneous
composite video signal over the same Coax.
• Two(2)powerconnectors.
Applications:
• RetrofitdigitalIPcamerasinananalogCCTV
installation.
• WorkswithMegapixel,HD720,HD1080andVGA
(SD) cameras (see note, pg. 2).
• ExtendNetworklinkdistanceinanindustrial
environment.
• UpgradedeployedCCTVCoaxtoadigitalnetwork
for Retail, Casinos, Airports, Schools, Hospitals, etc.
• Enablessimultaneoustransmissionofcompositeand
digital IP video.
Mechanical:
•Dimensions(WxLxHapprox.):
2.5” (63.5mm) x 3.8” (96.52mm) x 1” (25.4mm)
Features:
eBridge1CRT - IP over Coax Solution
eBridge1CR Receiver and eBridge1CT Transceiver Kit
Installation Guide
Rev. 070612
*slocisaregisteredtrademarkofIntersilCorporation.
I.T.E. 43KC
Z1409
Seitenansicht 0
1 2 3 4

Inhaltsverzeichnis

Seite 1 - Installation Guide

eBridge1CRT - 1 -Overview:The eBridge1CT and eBridge1CR are CAT5 to Coax cable Ethernet adapters. The paired set enables fast 10/100Base-T Ethernet

Seite 2 - Technical Specifications:

- 2 - eBridge1CRT c. Connectstructuredcablefromethernetswitch/NVR(networkvideoserver)toRJ45jackmarked[10/100BaseT] (Fig. 2, pg. 3).

Seite 3 - Equipment)

eBridge1CRT - 3 -Single IP camera shown with composite video option:Fig. 2 Fig. 2aSolutions and Installation Notes:Currently Matrix Switchers, DVR

Seite 4 - - 4 - eBridge1CRT

- 4 - eBridge1CRTMultiple IP cameras over a single Coax:Fig. 4*Note: Multiple cameras require higher bandwidth and headend equipment processing spe

Kommentare zu diesen Handbüchern

Keine Kommentare