Altronix RBR1224 Installation Instructions Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Altronix RBR1224 Installation Instructions herunter. Altronix RBR1224 Installation Instructions User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
RBR1224 - Electronic Toggle/Ratchet Relay
Specifications:
12VDC to 24VDC operation.
Positive (+) or negative (-) ultra sensitive trigger
(3VDC to 24VDC @ 20mA minimum).
DPDT contacts rated at
2 amp/120VAC/28VDC.
Relay status LED.
Remote LED status output.
Snap track mountable (order part # ST3).
Board dimensions: 3"L x 2.5"W x 1"H
Applications:
Use with PGM alarm control panel outputs.
Electronically shunt-alarm zones,
door control or keypads.
Interfaces with wireless receivers.
Converts momentary to maintained contacts.
Installation Instructions:
1. Connect aux power to terminals marked [POS (+)] and [NEG (-)].
2. The relay will change state to latch ON or OFF by the application of a positive
momentary trigger voltage to the terminals marked [TRG +] and [POS (+)] or negative
momentary trigger voltage to terminals marked [TRG -] and [NEG (-)].
3. Relay status LED is lit when relay is energized. To use a remote LED. Connect negative
lead of remoted LED, to terminal marked [LED] connect positive lead of LED to [POS (+)].
LED
TRG --
NEG (-- )
C
NO
NC
NC
NO
C
POS (+)
TRG +
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
IIRBR1224 - Rev. 10803 G14J
MEMBER
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - Installation Instructions:

RBR1224 - Electronic Toggle/Ratchet RelaySpecifications:• 12VDC to 24VDC operation. • Positive (+) or negative (-) ultra sensitive trigger (3VDC to 24

Kommentare zu diesen Handbüchern

Keine Kommentare