Altronix Maximal33RD Data Sheet Bedienungsanleitung PDF herunterladen

Maximal33RD rack mount access power controller distributes and switches

power to access control systems and accessories. It converts a 115VAC 50/60Hz

input into sixteen (16) independently controlled 12VDC and/or 24VDC PTC

protected outputs. Outputs are activated by an normally open (NO) or normally

closed (NC) dry trigger input from an Access Control System, Card Reader,

Keypad, Push Button, PIR, etc. This unit will route power to a variety of access

control hardware devices including: Mag Locks, Electric Strikes, Magnetic

Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure

modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or

may be used to trigger other auxiliary devices. The fire alarm disconnect feature

is individually selectable for any or all of the outputs.

Input:

• 115VAC60Hz.,3.8amp.

• Normallyclosed[NC]ornormallyopen[NO]

dry contact inputs (switch selectable).

Outputs:

• 12VDCor24VDC@12amptotaloutputcurrent.

 Powersupply1/(8)outputs:

 12VDC@6ampor24VDC@6amp

 Powersupply2/(8)outputs:

 12VDC@6ampor24VDC@6amp

• Sixteen(16)PTCprotectedoutputs.

• MaximumcurrentperACM8R-Moutputis2amp.

• IndividuallyselectableMagLock/Strike(Fail-Safe,

Fail-Secure) solid state fuse protected outputs.

• Thermalandshortcircuitprotectionwithautoreset.

Fire Alarm Interface:

• LatchingorNon-Latchingfirealarmresetswitch

individually selectable for each output.

• RemoteresetcapabilityforlatchingFireAlarm

Interface mode.

• FireAlarmdisconnectinputoptions:

 a)Normallyopen[NO]ornormallyclosed[NC]

dry contact input.

b)Polarity reversal input from FACP signaling

circuit.

Visual Indicators:

• IndividualOutputStatusLEDslocatedonthe

front panel.

Battery Backup:

• Built-inchargerforsealedleadacidorgeltype

batteries (if batteries are required install

separate enclosure).

• Maximumchargecurrent0.7amp.

• Automaticswitchovertostand-bybattery

when AC fails.

• Zerovoltagedropwhenunitswitchesovertobattery

backup (AC failure condition).

Supervision:

• ACfailsupervision(form“C”contact).

• Lowbatteryandbatterypresencesupervision

 (form“C”contact).

Additional Features:

• Removableterminalblockswithlockingscrewflange.

• 3-wirelinecord.

• Illuminatedmasterpowerdisconnectcircuitbreaker

with manual reset.

Mechanical:

• Dimensions(HxWxD)(approx.):3.25”(82.55mm)x

19.125”(485.78mm)x8.5”(215.9mm)

• Shipping Weight (approximate): 14.3 lbs (6.49kg).

Maximal33RD

Rack Mount Access Power Controller

Rev. DSMaximal33RD - 11012012

Overview

Specifications

Maximal33RD

1 2

Maximal33RD 1
TOP & BOTTOM 2

Inhaltsverzeichnis

Seite 1 - Maximal33RD

Maximal33RD rack mount access power controller distributes and switches power to access control systems and accessories. It converts a 115VAC 50/60Hz

Seite 2 - TOP & BOTTOM

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.comFRONTTOP & BOTTOMREARMaximal33RD Rack Chassis Dim

Kommentare zu diesen Handbüchern

Keine Kommentare

Altronix Maximal33RD Data Sheet Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Altronix Maximal33RD Data Sheet herunter. Altronix Maximal33RD Data Sheet User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für elektrische Altronix Maximal33RD Data Sheet