
PD16W, PD16WCB - UL Listed Sub-Assembly
Power Distribution Modules
Overview:
These UL Listed Sub-Assembly power distribution modules converts a single AC input into sixteen (16) individually
fused or PTC protected outputs.
Power Distribution Module Configuration Reference Chart:
Altronix
Model
Number
Number
of
Outputs
PTC Protected
Outputs
(Class 2 power limited)
Fuse
Protected
Outputs
Output Current
(max per output do not
exceed total output)
*Total output
12VDC or
24VDC
PD16W
16 --- x 2.5 amp 10 amp
PD16WCB
16 x --- 2 amp 10 amp
*Total output is limited by the total output of UL Listed power supply employed.
Specifications:
Installation Instructions:
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI, and with all local
codes and authorities having jurisdiction. Product is intended for indoor use only and should be installed
by qualified personnel.
1. Refer to Sub Assembly Installation Instruction for mounting Rev. MS042511.
2. Connect the desired UL Listed power supply output of a suitable rating to terminals marked [INPUT] (Fig. 1a, pg. 2).
3. Measure output voltage before connecting devices. This helps avoid potential damage.
All terminals with common suffix P 1P, 2P...” are same polarity.
5. Connect each device to terminal pairs 1 to 16, marked [1P-1N thru 16P - 16N] (Fig. 1, pg. 2).
For DC applications “N” terminals are negative and “P” terminals are positive. Note: Observe polarity.
Note: This product is a UL Listed Sub-Assembly for use with Altronix UL Listed power supplies
as indicated in the installation manuals for the power supply.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or
moisture. Replace fuses only with the same type and rating 3.5amp/250V.
Agency Listings:
• ULListedSub-AssemblyforAccess
Control System Units (UL 294) and
for Power Supplies for Fire Protective
Signaling Systems (UL 1481).
Input:
• 12VDCor24VDCupto10amp.
Fuse Ratings:
• Fusesarerated@3.5A/250V.
PTC Ratings:
• PTCsarerated@2A/250V
Visual Indicators:.
• PoweroutputLEDindicator(PD16W,PD16WCB).
Board Dimensions (approximate):
6”Hx5.875”Wx0.95”D(PD16W,PD16WCB)
Kommentare zu diesen Handbüchern