
The eBridge1PCR and eBridge1PCT are CAT5 to Coax cable
Ethernet adapters that deliver data and power over the coax cable in
a PoE compliant format. The paired set enables fast 10/100Base-T
Ethernet digital communication to be transmitted over Coax
cable. An eBridge1PCR receiver sends power over the coax to the
eBridge1PCT transmitter under PoE protocol. The eBridge1PCT in turn
delivers that PoE compliant power to a PoE enabled camera or IP device. The
eBridge1PCR will not deliver power to non compliant devices, thus avoiding dam-
age to improperly connected analog cameras. These plug and play units facilitate
system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor
associated with installing new network cabling. In addition, data transmission and power over the Coax is possible
up to1500 ft. in comparison to 100m (328 ft.). A maximum range from head end to the PoE camera/device is 610m
(2000 ft.) taking into consideration that up to 100m (328 ft.) of structured cable may be deployed at each end.
eBridge1PCRT - IP/PoE over Coax Kit
Rev. DSeBridge1CRT_08012013
Specifications
* sloc is a registered trademark of Intersil Corporation.
Agency Listings:
• UL/CULListedforInformation
TechnologyEquipment(UL60950-1).
• CEapproved.
• C-Tickcompliant.
Compliant:
• Incorporates*sloc
TM
(SecurityLinkoverCoax)technology.
Input:
• 24VDCClass2powersupply(polarity not observed)
or24VACClass2plug-intransformer.
Power Consumption (under maximum load):
• eBridge1PCR:24VDC/1,000mA,24VAC/900mA.
eBridge1PCT: Powered by eBridge1PCR.
Ethernet:
• Connectivity:RJ45,auto-crossover.
• Wiretype:4-pairCAT5orbetterstructuredcable.
• Distance:upto100m (328 ft.).
• Speed:10/100BaseT, half/full duplex, auto negotiation.
PoEcomplianttoIEEE802.3af(15W)Deliveredto
camera by eBridge1PCT. Power provided by
eBridge1PCR to eBridge1PCT by PoE protocol.
• Throughput is rated to pass 25mbps of data at
distancesupto1500ft.Withproperheadend
equipment, this supports Megapixel, HD720, HD1080.
Coax:
• Distance:upto1,500ft.for power delivery of coax.
• Connectivity:BNC,RG-59/Uorsimilar.
LED Indicators:
• eBridge1PCR:
BlueLED-Coaxlinkconnection(SLOC).
Green-PoEON.
Green-PowerON.
LED Indicators (cont’d):
• YellowandGreenLED(RJ45)IPLinkstatus,
10/100Base-T/active.
• eBridge1PCT:
BlueLED-Coaxlinkconnection(SLOC).
GreenLED-PoEfromeBridge1PCR.
Environmental:
• OperatingTemperature:
eBridge1PCR: ---4ºFto113ºF(---20ºCto+45ºC).
eBridge1PCT: ---4ºFto140ºF(---20ºCto+60ºC).
• Storage Temperature:
--22ºto158ºF(---30ºto+70ºC)Storage.
• Humidity: 20 to 85%, non-condensing.
Electrical:
• BTU/Hr.:24VDC:12.28.24VAC:11.1.
Functions:
• Autodetectionandprotectionoflegacy
non-PoE cameras/devices.
Applications:
• RetrofitdigitalIPcamerasinananalogCCTV
installation.
• WorkswithMegapixel,HD720,HD1080andVGA
(SD) cameras.
• ExtendNetworklinkdistanceinanindustrial
environment over 610m (2000 ft.) (see note, pg. 2).
• UpgradedeployedCCTVCoaxtoadigitalnetwork
in Retail, Casinos, Airports, Schools, Hospitals, etc.
Mechanical:
•Dimensions(WxLxHapprox.):
eBridge1PCR:
3.5” x 4.375” x 1” (88.89mm x 111.125mm x 25.4mm)
eBridge1PCT:
2.5” x 4.375” x 1” (63.5mm x 111.125mm x 25.4mm)
eBridge1PCR
and eBridge1PCT
Overview
Agency Approvals
UL/CULListedforInformation
TechnologyEquipment(UL60950-1).
European Conformity
C-Tick Compliant
Z1409
Kommentare zu diesen Handbüchern